Geometric art seems to be popular these days, so I wanted to incorporate the design trend in my next art project with the Dumpling. Combining it with the tape-resist technique, the Dumpling and I put a twist on this classic kid-friendly activity to create a series of geometric animals…and a heart!
Taping the designs might seem complicated and cumbersome, but I managed to create them pretty easily by tweaking a hack I learned online.
Materials
- Geometric animal outlines (download from thenounproject.com)
- Painter’s tape of desired width (I used 0.25″)
- Scissors
- Watercolor paper (or sturdy paper)
- Watercolor
- Pencil
- Photocopy paper (optional)
- Safety pin (optional)
- Towel (optional)
Directions
Download a geometric animal design. Head over to thenounproject.com to peruse its library of geometric animals and download the one you would like to use. All the animal designs I used in this project were created by Agne Alesiute from the Noun Project.
Dot the corners of the animal print. Open the image file on your computer and tape the paper (the one you will be painting on) onto the monitor so the print shines through. It doesn’t need to be perfectly visible—just enough to see the outlines. If preferred, zoom in to enlarge for a bigger design.
Lightly dot all of the corners with a pencil…with emphasis on “lightly” because you don’t want the markings to be noticeable on the final.
If your paper stock that is too thick for the image to shine through, apply this step on regular photocopy paper first. Then remove the photocopy paper from your monitor and puncture the dots with a safety pin. I’ve found it helpful to do this on top of a flat surface with a towel underneath. Using the punctured image as a guide as to where to dot, lay it on top of the paper you will be painting on and lightly mark each hole with a pencil…again, emphasis on “lightly”.
Connect the dots with painter’s tape. Before investing the effort in applying all that tape, test peeling off a small strip to see whether it tears your paper. If it does, tape the strip on your shirt first to remove some of its adhesiveness.
As you are connecting each dot, keep the original image file open on your screen for reference because the dots may look entirely random!
Color with watercolor.
Peel the tape off once the paint dries. I removed all the strips easily and was rewarded with sharp, clean lines. Despite spending so much effort taping everything on, it was quite satisfying taking them off!
* All geometric animal designs used here are created by Agne Alesiute from the Noun Project.
mrs. jigg 
2 thoughts on “DIY Tape-Resist Geometric Animals”